
CNC V-GROOVING MACHINE
The CNC V-Grooving Machine is a servo-driven sheet metal processing machine engineered to score precision V-shaped grooves along a bend line before folding. By removing a controlled wedge of material rather than cutting through the sheet, the machine allows the plate to fold into a sharp, near-zero-radius corner, the finish demanded by high-end stainless-steel fabrication where weld lines and visible radii are not acceptable. This machine is built for fabricators supplying the elevator, architectural cladding, commercial kitchen, signage, and high-end metal furniture industries across the UAE and GCC sectors where surface finish and corner precision are inspected.
| MODEL | 2600x6000 | 2600x3200 | 3000x4000 | 2600x4000 | 1500x6000 | |
|---|---|---|---|---|---|---|
| Max. Grooving Width | (mm) | 2600 | 2600 | 3000 | 2600 | 1500 |
| Max. Grooving Length | (mm) | 6000 | 3200 | 4000 | 4000 | 6000 |
| Max. Grooving Thickness | (3mm) | 4 | 4 | 4 | 4 | 4 |
| Min. Grooving Thickness | (mm) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Max. Grooving Distance | (mm) | 8 | 8 | 8 | 8 | 8 |
| Max. Cutting Speed | (m/min) | 45 | 45 | 45 | 45 | 45 |
| Knife Rest Resolution (L&R) | (mm) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Positioning Accuracy | (mm) | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 |
| Main Motor | (kW) | 4.4 | 4.4 | 4.4 | 4.4 | 4.4 |
| Hydraulic System | (mpa) | 6-8 | 6-8 | 6-8 | 6-8 | 6-8 |
| Dimensions (LWH) | (mm) | 7500x4000x2200 | 4700x4000x1980 | 5600x4500x2000 | 5600x4000x2000 | 7500x3500x2000 |
Lists of Main Parts
| Name | Brand | Country of Origin |
|---|---|---|
| Ball Screw | HIWIN | Taiwan |
| Linear Guide-way | PHI | Taiwan |
| Contactor | Schneider | France |
| Thrmal Relay | Schneider | France |
| Cable | Importation | |
| Display Screen | WILEN | Taiwan |
| Pneumatic Element | AIRTAC | Taiwan |
| Servo Motor | Delta | Taiwan |
| Servo Driver | Delta | Taiwan |
| Rack and Gear | FengMao | Taiwan |
| System | Abel | Taiwan |
| Three Tube Pass | Hong Kong | |
| White Steel Knife Slices | Sweden |
Structural Features
This machine consists of frame, beam, tool post, numerical control system, hydraulic pressure system,compressed air and cooling system, etc., to the framework of vertical structure.
- Frame, beam adopts box-type structure, the finite element optimization design, full steel welding for welding before milling machine processing, fully ensure no gap between plate and plate, to eliminate residual stress after welding the tempering furnace, overall good rigidity, good accuracy stable. Moving up and down (Z-axis) and clamp (X-axis) before and after moving average, controlled by CNC system, ac servo motor drive, ball screw linear guide transmission, with high control precision, the precision of positioning.
- Beams around (A-axis) mobile use MITSUBISHI CNC system, closed loop servo motor drive, helical gear, rack drive, has many characteristics, such as high speed, load ability.
- Adopts hydraulic pressure loading system, which can adaptively according to the different thickness on the back of the artifacts and feed forward, pollution to the plate and on the environment and the temperature of the effective guarantee, is one of the effective measures to ensure the machining accuracy and repeat precision.
- Compressed air and cooling system, which can prevent the cutting waste, scratch the surface, but also through the tool of cooling, improve the service life of the cutting tool. On the same side of the machines pressure feeding system of blowing system, more greatly ensure the waste collection.
Performance Characteristics
Stable, solid and convenient use, etc
- Control system has many parameter selections, large memory capacity, easy to operate.
- Control shaft for three axes, including 3 axes for AC servo motor system, high control precision. 3-6 knife cutting structure, can greatly improve the work efficiency, and can improve the processing quality of the products.
- Use ball screw, linear guide, gear and rack movement system, improve the precision and durability of the machine.
- Repeat positioning accuracy: +/-0.03 mm.
Pneumatic System
- Pneumatic system design compact structure, strong sealing performance, long service life. Imported pneumatic components, good sealing performance, low noise, fast response, strong environmental adaptation.
Electrical Control System
- Electrical components meet international standards, safe and reliable, strong anti-interference ability. Electric control adopts programmable controller, variable frequency speed governor, no contact operation, safe and reliable, long service life.
Front and Side Pressure Feet
- The foot is treated with quenching, not easy to deform. The pre - pressure material and the back - tube position adopts spring - type independent hydraulic pressure cylinder and clamping forceps. The pre - pressure material and the back - tube position adopts spring - type independent hydraulic pressure cylinder and clamping forceps.
Table
- Adaptive integral adjustable working mesa, material is 42 crmo, after forging, tempering, quenching, and greatly improving the service life, such as improper operation caused by uneven mesa, the function of the machine tool with the adjusting of the cutting table
Three Tube Pass
- Smooth transmission movement, small noise, high precision, and shell for casting, one-time molding, and long life.
Operating System
- No encoder
- Quick input dimension
- Background edit function
- Typesetting function
- A sudden drop of the beam will slow down and stop the gravity collision
- The beam is run by two modes from slow to fast/constant spee
- Automatic button size function
- Return function
- Jump function
- Sudden drop of power on processing memory
- Bluetooth transmission program
- Qr code transmission program
Project Portfolio
MACHINE WORK APPLICATION








CNC V-GROOVING MACHINE
Structure and Characteristics
Precision Servo Control
Accurate CNC-controlled positioning helps maintain consistent groove locations across individual components and production batches.
Servo-Driven Positioning
Independent servo-driven axes provide controlled movement and repeatable positioning for demanding fabrication work.
Wide material range
Processes stainless steel, mild steel, and composite sheet from 3mm to 6mm, covering signage-grade thin gauge through structural-grade panel work.
High-Speed Production Axes
The X axis can reach up to 30 m/min, while the A axis reaches up to 100 m/min, supporting efficient movement between programmed operations.
Robust Industrial Build
Rigid steel frame minimize vibration and deflection at full working length, protecting groove consistency sheet after sheet
Near-zero radius bending
Grooved sheets fold into sharp 90° corners without visible weld seams, or surface cracking suitable for elevator panels and mirror-finish cladding.
Our Global Manufacturing Partners
TRUSTED BY INDUSTRY LEADERS





















Reach out today
Whether you're establishing a new factory or expanding an existing production line, we are your trusted industrial equipment partner.
- mk1@mktrd-uae.com
- +97165366610
- +971565092554
- 2nd Industrial St, Industrial Area 3, Ananas Bldg. Sharjah, UAE
Request a Quote
Or speak to our engineers for tailored recommendation, layout study and specifications
